CSR Heat Reduction Package for 2009-2016 Harley Touring






This CSR Heat Reduction Package Includes:

  • CSR 200CX Ceramic Coated Chrome Headers
  • CSR Stage 1 Air Intake (utilizes your stock cover)
  • Zipper’s Thundermax Auto Tune
  • K&P S44 Chrome Oil Filter/Oil Cooler
  • Optional Love Jugs Cooling Fans for further cooling

FREE Diagnostic Dyno Run Coupon

When you purchase a power pack from Cycle Solutions Inc. you will receive a dyno coupon that you can bring to us at one of the events we attend (see our Event Schedule) and we will perform a diagnostic test on our dyno that will tell us how your motorcycle is performing.

Tuners will be shipped pre-mapped for you based on the products you purchase in your power pack.  These base maps are offered by Dynojet and Thunderheart and are a nice start to getting performance out of your motorcycle.  Your tuner will perform its best when you have a custom map built specifically for your motorcycle and your specific parts combination.

At the time of your diagnostic run, you can choose to have a custom map built for your motorcycle for an additional fee.  This additional fee will get you every ounce of performance from your investment.  Cycle Solutions Inc. is one of the top tuners of V-Twin motorcycles in the nation.  We tune thousands of motorcycles every year. If you have considered having a custom map built for your motorcycle then you definitely want a professional tuner to do the job.  We are a professional tuner.

CSR Headers

  • Headers have a high quality ceramic coating to help keep heat in. This is a solid coating and not just a cheap spray.
  • This is a 2 into 1 into 2 so it has a crossover chamber
  • This is a stepped system which means more exhaust flow for more performance
  • Fits most aftermarket slip ons
  • Easy installation
  • Our system has both the 12mm and the 18mm 02 sensor ports so it can be used with a Thundermax auto tune or PCV auto tune module
  • We sell and install thousands of head pipes. Our headers are built based on proven performance and a higher quality
  • Available in Black or Chrome

ThunderMax Auto Tune Module

  • Dramatically improved throttle response by allowing throttle blade to open fully below 3500 RPM
  • Eliminates popping, spitting and backfiring
  • Easier starting
  • Increased Engine Performance & Motorcycle Rideability
  • Cooler, Smoother Running Engine
  • Adjustable Idle Speed & Rev Limit Control
  • Automatically Tunes for Riding Style & Riding Conditions
  • Easily Accommodates Bike Changes (Pipes, Cams, and More)
  • 100% Engineered & Made in the USA
  • 3-Year Factory Limited Warranty

CSR Stage 1 & 2 Intakes

This Air intake is easy to install and easy on the budget. Our Air Intake kit is designed to completely replace the stock air cleaner assembly, with your choice of a stage 1 or stage 2 filter element. This cleanable/oilable, pleated element is over 2 1/4″ tall for the stage 1 and a 2 3/4″ tall element for the stage 2 to really let that engine breather! Also included is a one-piece cast backing plate with internal crankcase venting and mounting hardware. Uses the stock air intake cover or you can also use a round stg 1 aftermarket cover also.

K&P S44 XL Oil Filter

This exclusive to Cycle Solutions product has approximately 20%(21.8%) more cooling surface than the original oil cooler/filter. The surface area of the XL is the equivalent of a 6” smooth surface (non-finned) oil filter. The volume of oil inside the filter is increased by 14%. Oil Flow has increased also over the original K & P Oil Cooler/Filter. What does all this mean? Better Oil Cooling Capabilities More Cool Oil Circulating Through the Motor Reduced Oil Temperatures Better Oil Flow

Plus You Get All the Benefits of the Original K&P Oil Cooler/Filter Reduced Bypass Operation Faster Oil Pressure at Startup Reduced Oil Pump Drag for Potential HP Gains Magnetic Pre-Filtering

And last but not least: It is a Lifetime Environmentally Friendly Oil Cooler/Filter – Inspect, Clean, Reuse

K&P S69 XXXL Oil Filter

Cycle Solutions Exclusive: New K & P Engineering Extended Length (XXXL) Oil Cooler/Filter

This exclusive to Cycle Solutions product has 100% more cooling surface than the original S4 oil cooler/filter as well as, 100% more housing size and 100% additional cooling fin and filter media area. This filter has a huge WOW factor due to its large size. The total length of the filter housing is 5-1/8″.

Love Jugs Cooling Fans


All 2014-Newer FLH/FLT Touring bikes MUST have the adapter plug to install this product by using the accessory switch plug.

LOVE JUGS have been designed and manufactured to meet the highest standards of quality throughout. For example, LOVE JUGS are made of the best quality materials with no skimping anywhere.

POWER: LOVE JUGS manufactures the most powerful, and by far the most effective, high performance, waterproof fans available. We do not use “Off the shelf” fans that all our competitors use. At 252 CMFs, our fans put out over twice the air as the nearest “competitor”. Don’t be fooled by the comments of overkill, your hot beast needs every bit of the velocity that we provide. But it’s not only how much air, but where that air flow is directed. Our engineers have meticulously located the unit to sit at precisely the optimum placement to concentrate the LOVE JUGS powerful air streams, at the hottest area of your engine’s cylinders. Only a two fan system can properly direct the air to the critical heat producing areas; and only Love Jugs has the power to do so very effectively. This system uses a low amperage draw to operate. It uses a maximum of 3.2 Amps.

CONSTRUCTION: Love Jugs are designed and manufactured to be the highest quality in every regard. The body is all Aircraft quality Stainless Steel construction polished to a high chrome finish. Compare this material to others whose body construction is either aluminum or mild steel. Although it’s more expensive, we exclusively use stainless steel because, unlike the other painted or chromed metals, it will never blister, chip. or rust. Ten years from now LOVE JUGS will still look brand new. Another important fact that sets our product apart from the field is that no welding is used in our manufacturing process. This is especially important considering the extreme vibrating environment generated by a Harley engine. Weld free manufacture prevents material fatigue, as well as the failure factor common in welded parts. These perils are not an issue for LOVE JUGS.

FANS: This is arguably the most important single element in all the systems. Let the facts speak for themselves. First of all LOVE JUGS fans are twice as powerful than their nearest competitor. In addition, they are 100% waterproof. We were shocked to discover that some other manufacturers actually have been employing less expensive indoor rated fans which will short out when exposed to water. For over two years our engineers aspired to master the art of cooling your hot beast. Using thermodynamic photography, along with in-shop and on-the-road testing, our engineers determined just how much power and what precise placement a cooling system needs to have in order to make your engine think it’s being cooled by an equivalent amount of air when standing still as it would tooling down the highway.

PERFORMANCE: Love Jugs are by far the most powerful and effective cooling system available. Our competition say’s that Love Jugs’ superior power is overkill, nothing could be further from the truth. Of course they have to make up a ridiculously false statement like that. What else can they say? They can’t even come close to matching Love Jugs’ power and effectiveness. Here is what the Buell engineers quote in their US Patent application for a forced air cooling system. “The higher the volume of air flowing over an air cooled motorcycle engine, the more effective the cooling fins are at transferring heat from the engine to the air.”

WATERPROOFING: Love Jugs’ IP 68 fans have always been 100% waterproof from our first prototype on. They will actually run while submerged underwater! Believe it or not, some competing systems use indoor rated fans which will short out when exposed to water – even during a washing.

OIL TEMPERATURE: Oil temperature is another vitally important issue that LOVE JUGS solves. Even a fan assisted oil cooler cannot equal the cooler oil temps. of a Love Jugs equipped air cooled V-twin engine. It has been proven and well known that a LOVE JUGS cooling system will lower oil temperatures, which dramatically increases oil pressure especially at idle, due to the cooler operating engine temperatures of LOVE JUGS equipped bikes. Increased oil viscosity due to cooler oil is critical for the longevity of your engine.

WARRANTY: Love Jugs are rated for a minimum of 20,000 hours of life. We provide you with a full year 100% warranty on electrical components and three (3) year warranty on all other parts.